전체상품목록 바로가기

본문 바로가기


현재 위치
  1. 게시판
  2. 자료실-통신관련

자료실-통신관련

광통신,시리얼통신,무선통신 및 네트웍통신관련 자료실입니다.

게시판 상세
제목 산업용 일반 RS232 케이블 연결방법
작성자 엑사통신 (ip:)
  • 평점 0점  
  • 작성일 2018-08-01 14:24:00
  • 추천 추천하기
  • 조회수 1162

RS-232 케이블 연결방법

This document includes information how to make common wires for RS-232 connections.

 I have shown pinouts for standard 25 pin connection and de-facto 9 pin connector used in PCs.

Normal DTE-DCE connection

Thise wirings can be used with normal Data Terminal Equipment (DTE) to Data Communications Equipment (DCE) connections. The wiring are standard way to do asyncronous DTE to DCE connection and they support hardware handshaking. Good wires for PC to modem connections. 9 pin to 25 pin wiring can also be used for making 9 pin to 25 pin connector adapters.

 

DTE (25 pin)                 DCE (25 pin)

TD   2 ------------------------> 2

RD   3 <------------------------ 3

RTS 4 ------------------------> 4

CTS 5 <------------------------ 5

DSR 6 ------------------------> 6

DCD 8 ------------------------> 8

DTR 20 ------------------------> 20

SG   7 ------------------------- 7

RI    22 <------------------------ 22

 

DTE (9 pin)                  DCE (25 pin)

TD   3 ------------------------> 2 

RD   2 <------------------------ 3 

RTS 7 ------------------------> 4 

CTS 8 <------------------------ 5 

DSR 6 ------------------------> 6 

DCD 1 ------------------------> 8

DTR 4 ------------------------> 20

SG   5 ------------------------- 7

RI    9 <------------------------ 22

Two-wire DTE-DCE wiring

This wiring can be used between DTE and DCE where hardware handshaking is not needed.

 

DTE (25 pin)              DCE (25 pin)

TD   2  ------------------------> 2

RD   3 <------------------------ 3

RTS 4  ----,                      ,----- 4

CTS 5 <---'                      '----> 5

DSR 6 <---,                      ,----> 6

DCD 8 <---|                     |----> 8

DTR 20 ----'                     '----- 20

SG   7 ------------------------- 7

 

DTE (9 pin)               DCE (25 pin)

TD   3  ------------------------> 2

RD   2 <------------------------ 3

RTS 7  ----,                     ,----- 4

CTS 8 <---'                     '----> 5

DSR 6 <---,                     ,----> 6

DCD 1 <---|                    |----> 8

DTR 4  ----'                     '----- 20

SG   5 ------------------------- 7

Null modem cable

This cable can be used when you must connect two DTE equipments like computers to each other directly without using any data communication quipment in between computers. This wiring supports hardware handshaking.

 

DTE (25 pin)                DTE (25 pin)

TD   2  ---------\ /------------- 2

RD   3 <--------/ \------------> 3

RTS 4  ---------\ /------------- 4

CTS 5 <--------/ \------------> 5

DSR 6 <---,                       ,----> 6

DCD 8 <---+----\ /-------+----> 8

DTR 20 ---------/ \------------- 20

SG   7  ------------------------- 7

 

DTE (25 pin)                DTE (9 pin)

TD   2  ---------\ /------------- 3

RD   3 <--------/ \------------> 2

RTS 4  ---------\ /------------- 7

CTS 5 <--------/ \------------> 8

DSR 6 <---,                       ,----> 6

DCD 8 <---+----\ /-------+----> 1

DTR 20 ---------/ \------------- 4

SG   7 ------------------------- 5

 

DTE (9 pin)                 DTE (9 pin)

RD   2 ---------\ /------------- 2

TD   3 <--------/ \------------> 3

RTS 7 ---------\ /------------- 7

CTS 8 <--------/ \------------> 8

DSR 6 <---,                       ,----> 6

DCD 1 <---+----\ /-------+----> 1

DTR 4 ---------/ \------------- 4

SG   5 ------------------------- 5

Two-wire DTE-DTE connection

This cable can be used when you must connect two DTE equipments like computers to each other directly without using any data communication quipment between computers. This wiring needs only two signal wires and ground between computers but does not support hardware handshaking.

DTE (25 pin)                 DTE (25 pin)

TD   2 ---------\ /------------- 2

RD   3 <--------/ \------------> 3

RTS 4  ----,                       ,----- 4

CTS 5 <---'                       '----> 5

DSR 6  <---,                      ,----> 6

DCD 8 <---|                     |----> 8

DTR 20 ----'                      '----- 20

SG   7 ------------------------- 7

 

DTE (25 pin)                 DTE (9 pin)

TD   2  ---------\ /------------- 3

RD   3 <--------/ \------------> 2

RTS 4  ----,                       ,----- 7

CTS 5 <---'                       '----> 8

DSR 6  <---,                      ,----> 6

DCD 8 <---|                     |----> 1

DTR 20 ----'                      '----- 4

SG   7 ------------------------- 5

 

DTE (9 pin)                   DTE (9 pin)

TD   3  ---------\ /------------- 3

RD   2 <--------/ \------------> 2

RTS 7  ----,                       ,----- 7

CTS 8 <---'                       '----> 8

DSR 6 <---,                       ,----> 6

DCD 1 <---|                     |----> 1

DTR 4  ----'                      '----- 4

SG   5 ------------------------- 5

PC to printer cable

This is a wiring for cable for connecting printer to computer. Both printer and computer are DTE quipment and printer uses DTR busy signalling. This is good cable for PC to printer connection when printer uses DTR bysy or XON/XOFF signalling.

Computer                                 Printer

DTE (25 pin)                     DTE (25 pin)

TD   2  ------------------------> 3 RD

RD   3 <------------------------  2 TD

CTS 5 <--+--------------------- 20 DTR

DSR 6 <--'

DCD 8  <--,

DTR 20 ---'

SG  7  -------------------------  7 SG

 

Computer                                 Printer

DTE (9 pin)                      DTE (25 pin)

TD   3  ------------------------> 3 RD

RD   2 <------------------------  2 TD

CTS 8 <--+--------------------- 20 DTR

DSR 6 <--'

DCD 1 <--,

DTR 4  ---'

SG   5 -------------------------  7 SG

Loopback tester

This is a simple and useful tool for testing RS-232 ports in DTE equipment are working working or not. This plug is connected so that every sent character is echoed back.

DTE (25 pin)

TD   2  --------,

RD   3 <-------'

RTS 4  --------,

CTS 5 <-------'

DSR 6  <-------,

DCD 8 <-------|

DTR 20 --------'

 

DTE (9 pin)

TD   3  --------,

RD   2 <-------'

RTS 7  --------,

CTS 8 <-------'

DSR 6 <-------,

DCD 1 <-------|

DTR 4  --------'

 

출처 : http://www.epanorama.net/documents/pc/rs232cables.html


첨부파일
비밀번호 수정 및 삭제하려면 비밀번호를 입력하세요.
관리자게시 게시안함 스팸신고 스팸해제 목록 삭제 수정 답변
댓글 수정

비밀번호 :

수정 취소

/ byte

비밀번호 : 확인 취소

댓글 입력
댓글달기 이름 : 비밀번호 : 관리자답변보기

영문 대소문자/숫자/특수문자 중 2가지 이상 조합, 10자~16자

확인

/ byte

왼쪽의 문자를 공백없이 입력하세요.(대소문자구분)

관리자에게만 댓글 작성 권한이 있습니다.



장바구니 0
 

WORLD SHIPPING

PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :

GO
close